0 items $0.00 AUD VIEW CART
1300 CLEANWATER
Product Categories
Residential & Rural > Whole House Filtration Systems > Iron Removal (Including Hydrogen Sulphide and Manganese Removal

Bore water filtration and removal of iron, manganese and hydrogen sulphide

Our iron, manganese and hydrogen sulphide filters utilise world class catalytic oxidation media to effective oxidise and remove the unwanted contaminants from your water supply. 

Iron and manganese are unaesthetic parameters present mostly in groundwater, causing unwanted precipitation and color. Iron removal is based on the precipitation of dissolved iron (Fe2+) into its oxidized form (Fe3+), as Fe(OH)3 or Fe2O3. Hydrogen sulphide (H2S) is a dissolved gas that gives water a characteristic “rotten egg” taste and odour. It corrodes piping, creates odours in the house and turns water black. H2S often occurs naturally in well water, or it can be caused by the presence of sulphate-reducing bacteria in a well or water system. Since bacteria are the most common cause, treatment to control them should be tried first. Shock chlorination is the standard treatment for control of sulphate reducing and iron bacteria in a well. O

Zeomangan is formulated from a glauconite greensand and is capable of reducing iron, manganese and hydrogen sulfide from water through oxidation and filtration. Soluble iron and manganese are oxidized and precipitated by contact with higher oxides of manganese on the greensand granules. The hydrogen sulfide is reduced by oxidation to an insoluble sulfur precipitate. Precipitates are then filtered and removed by backwashing

Iron, manganese and Hydrogen Sulphide removal using one single media

Iron, manganese and Hydrogen Sulphide removal using one single media

 

PWT olso offer a new revolutionary iron removal media made in Germany.  A chemical free solution to typical Greensand applications.
Katalox-Light is a  new  filtration media used for the removal or reduction of iron, hydrogen sulphide, manganese and sediment down to 3 microns.    The PWT air injection  system uses simple air injection and oxidation to remove Iron ( Ferrous & Ferric), Manganese,  and Hydrogen Sulphide Gas “rotten egg odour”!  Iron, manganese and hydrogen sulphide are oxidised in the filtration media. A simple backwashing-approximately every 1-3days, initiated by our automatic control valve cleans the bed. 
 

Katalox-Light removal rates
Iron, up to 30 ppm
Hdrogen Sulphide, up to 10 ppm
Manganese, up to 15 ppm
Sediment, down to 3 Microns

The Water Quality Association (WQA) has set voluntary performance standards for oxidative filtration methods. They specify that an oxidizing filter shall reduce:

  • 10.0 ppm plus or minus 1.0 ppm soluble iron to not more than 0.2 ppm
  • 2.0 ppm plus or minus 0.2 ppm soluble manganese to not more than 0.5 ppm
Top