Booster Pump with adaptor, high pressure switch, low pressure switch (complete assembly on bracket)

High flow booster pump for RO system  with step down transformer to 24 V, included ( 240 V, 50 Hz)

 

Booster pumps provide reliable inlet pressure for efficient membrane utilization and are ideally suited for continuous duty.
Safe operation with low-voltage AC motors.
Built-in Fittings: ¼” Quick Connect or; Threaded Compression

Booster Pump Reverse Osmosis Systems

SKU RO102BAK Category Tags ,

$174.90

In stock (can be backordered)

Description

 Description-Booster Pump RO Systems

The purpose of the reverse osmosis booster pump is to increase water pressure going into the RO unit. Booster pumps provide reliable inlet pressure for efficient membrane utilisation. These pumps are capable of continuous duty and are effective for recirculation based applications as well. They are ideally suited to work with hydro-pneumatic storage systems but are compatible with most hydraulic shut-off valves also.

These pumps are commonly used with one or more flow control components including: pressure switches, tank level controllers, or electronic shut-off valves. A typical “RO Kit” includes a booster pump, pressure switch, and transformer, which is included.

Reverse osmosis is a pressure-driven process. Small residential RO units will theoretically operate on very low pressure–down to 35 psi, according to some membrane makers–but the reality is, you won’t get a lot of water and the product water quality will be compromised if the unit runs below 45 psi. Low inlet pressure makes the unit produce more reject water, produce less drinking water, fill the storage tank more slowly, and produce lower quality water.

RO units run well on typical city water pressure of 60 psi, but they run even better with a small pump to boost the pressure to 80 psi or higher.

Booster Pump RO Systems Features

  • 3 Chamber Diaphragm Pump
  • Self Priming
  • Capable of Being Run Dry
  • 24 VAC Permanent Magnet Totally Enclosed Non-Ventilated Motor
  • Materials of Construction:
    • Nylon Housing
    • EPDM Valves
    • Santoprene Diaphragm
    • Stainless Steel Fasteners
  • Certified to NSF Standard 58

Booster Pump RO Features

  • Pre-Filter Water Treatment
  • RO Boost
  • Carbonation Systems
  • Misting Systems
  • Alternative Energy/Solar
  • Medical Labwater
  • Laser Cooling Systems
  • Fuel Cells

Includes complete assembly including pressure switches

Model: HF- 8367
Voltage: DC 24 V
Pressure: 70~100PSI
Inlet”0″: By pass 80PSI
Prime: self priming up to 3 meters.
Flow:100GPD

PORTS: 1/4″ push in fittings

N.W.: 1.8KG

 More Specifications : BOOSTER PUMP FOR RO SYSTEM

Additional information

Weight 4.5 kg
Dimensions 42 x 24 x 18