Overview- Water Purification System.
The LH3-8 Water Purification System is based on world class ultrafiltration technology used in the commercial industry to produce bottled water and spring water. Just like reverse osmosis, ultrafiltration water purification systems are based on membrane technology.
Features and Benefits – LH3-8 Water Purification System
O.O1 Micron filtration by particle exclusion.
Cross flow filtration( outside-in) increases surface area, and less prone to fouling.
Removes all bacteria, cysts, viruses, algae and other microbiological contamination.
Retains the healthy minerals in the water .
Much higher flow rate( up to 50 times more than a RO unit of similar size)
Very low maintenance and easy to install
Minimal treatment waste compared to reverse osmosis.
Technical Details – Water Purification System
The LH3-8 Water Purification System uses thousands of ultrafiltration hollow fibre membrane strands. Each membrane strand contains billions of microscopic pores. Household water pressure pushes water molecules through these pores towards the hollow centre of the membrane. The membrane filtration provides 99.9999% reduction of bacteria and 99.99% of virus by mechanical means. Filtered water then flows through each fibre and is distributed to every household fixture.
Due to the small pore size, particles that are too large to pass through are physically blocked out, while dissolved salts and essential minerals freely pass through.
Unlike Reverse Osmosis, Ultrafiltration does not remove the dissolved mineral salts, hence the filtered water is not acidic and provides improved health benefits.
The LH3-8 Water Purification System provides a high flow of up to 1000 l/hr of filtered drinking water. The membrane system needs to be installed so that the drain water is plumbed up to a fixture that can be used for non-potable purpose. This will ensure that the membrane module is flushed on a regular basis and will not clog up. The permeate flow can be connected to the potable applications.